Zenty 1080p Wireless Connection

Summary

Zenty 1080p Wireless Display adapters can be connected to using Windows devices, Apple AirPlay, or some mobile casting apps.

Body

Overview

Applies to: This knowledge base article is for faculty, staff, or even students who would like to connect wirelessly to a projector or display in various classrooms, meeting, and event spaces.

Information: Some classrooms may have a wireless connection that is only support by Windows-based devices. The same steps below will largely apply, except that AirPlay and other casting apps are not supported, only Windows Connect.

Prerequisites

No additional software should be needed if connecting with a Windows-based device. To connect with an Apple device, you will need AirPlay.

Other supported screen casting apps include: Samsung Smart View, Lenovo Wireless Display, Oppo Smart Screen, and Vivo Smart Screen.

Windows Device Connection ⇵

Windows Connection Steps

Press the “Source Search” button on the white Epson projector remote until you get to a “Wireless Connection” screen.

Tip: There also may be a touch panel, TV remote, or a video switcher in the room that needs to be pressed to get to this option.

Once at the Wireless Connection screen, press “Windows+K” to view all available casting devices.
- There should be a labelled option for the room you are connecting in. For example: “WD-1009”. The wireless device should match to the room you are in.
When connecting, you should see a small blue symbol in the bottom right.
- Once connected, please check your display settings to ensure a 1080p resolution for best results.

Important: When finished, press “Windows+K” again and select the disconnect option.

Apple AirPlay Connection ⇵

Apple Airplay Connection Steps

Press the “Source Search” button on the white Epson projector remote until you get to a “Wireless Connection” screen.

Tip: There also may be a touch panel, TV remote, or a video switcher in the room that needs to be pressed to get to this option.

Make sure that your device is compatible with AirPlay. Connect to JJCGuest in your WiFi settings.
On your device, click on the Control Center icon located in the top right corner of your screen. Select “Screen Mirroring” then "AirPlay". Select the desired display name.
- There should be a labelled option for the room you are connecting in. For example: “WD-1009”. The wireless device should match to the room you are in.
When connecting, you should see a small blue symbol in the bottom right.
- Once connected, please check your display settings to ensure a 1080p resolution for best results.

Important: When finished, please be sure to disconnect in your Screen Mirroring settings.

Mobile Device Connection ⇵

Mobile Device Connection

Press the “Source Search” button on the white Epson projector remote until you get to a “Wireless Connection” screen.

Tip: There also may be a touch panel, TV remote, or a video switcher in the room that needs to be pressed to get to this option.

Make sure that your device is compatible with: Samsung Smart View, Lenovo Wireless Display, Oppo Smart Screen, or Vivo Smart Screen.
- Follow the instructions on your mobile device to connect.

Important: When finished, please be sure to disconnect in your mobile device settings.

Details

Article ID: 3857

Created

Thu 10/30/25 4:32 PM

Modified

Thu 11/20/25 8:57 AM